Flyingmachinesmusic

Treating Algae in Poly Diesel Fuel Tanks

Treating Algae in Poly Diesel Fuel Tanks

It is one thing to find that your poly diesel fuel tank has algae in it. But it is a different story, another ball game to face if you try to remove them and keep them out for good.  This is one game you can’t afford to be on the losing end because at stake here is it would perpetually cause your headache.  

It is pretty simple and straightforward to address diesel fuel algae, provided of course that what you have at hand is the right solution. By saying simple, what we exactly mean here is you follow these recommendations we have outlined here. Doing so will work to your advantage and will give you a good chance to put this kind of problem right behind you.  

Remove the Water from Your Poly Diesel Fuel Tank

This is the most crucial step when it comes to getting rid of algae in your fuel tank. These microorganisms, together with microbes, have a dire need for water and moisture in order to thrive and survive. Let us say that your tank contains about half an inch of water, you then need to find ways to drain that amount of water out. 

After which, follow up with the use of a water-absorbing chemical compound. This measure would help in cleaning up the rest. Skimping this part runs the risk of putting your effort in vain. So, therefore, have diligence on this and see to it that the remaining water in your tank will be taken out.  

Apply a Biocide and Veer Away from the Use of Generic Water Treatment

We are not going to contradict ourselves here after suggesting that you clean up and clear away with the use of chemical treatment. Please note that it is not intended to destroy the microbes but rather to fix the environment so that it will be harder for them to flourish due to the absence of water. 

Only with the use of a high-grade biocide will you be able to address your tank’s active microbial contamination. Take caution though on its use because fuel biocides belong to the heavily guarded, controlled and regulated substances because they are capable of extinguishing every active living organism regardless of the liquid they are applied in. 

Ensure Best Mixing By Blending the Fuel Thoroughly

You can’t just pour biocide into your poly diesel fuel tank,  on top of your existing fuel and leave it as is hoping that it will diffuse down on its own, and carry out what it is expected to do. What the industrial bulk fuel users normally will do i0s to inject the biocide directly into the fuel line. Doing so will give them a good level of assurance that biocide will get mixed in, effectively.

Biocide will not work effectively if it is not in contact with what it is supposed to exterminate. This explains the reason why it needs to get mixed into your fuel and make it blend in really well.  It would be a great thing if you have a way of injecting into the fuel line. 

What others will do instead is to add the biocide and let it sink in, circulating for some time, which also works pretty well. And finally, see to it also that you have some extra fuel filters on stand by, to help you out on filtering dead microbes. Heed the above recommendations and you are likely to have better chances of getting things right the first time.