Flyingmachinesmusic

Treating Algae in Poly Diesel Fuel Tanks

Treating Algae in Poly Diesel Fuel Tanks

It is one thing to find that your poly diesel fuel tank has algae in it. But it is a different story, another ball game to face if you try to remove them and keep them out for good.  This is one game you can’t afford to be on the losing end because at stake here is it would perpetually cause your headache.  

It is pretty simple and straightforward to address diesel fuel algae, provided of course that what you have at hand is the right solution. By saying simple, what we exactly mean here is you follow these recommendations we have outlined here. Doing so will work to your advantage and will give you a good chance to put this kind of problem right behind you.  

Remove the Water from Your Poly Diesel Fuel Tank

This is the most crucial step when it comes to getting rid of algae in your fuel tank. These microorganisms, together with microbes, have a dire need for water and moisture in order to thrive and survive. Let us say that your tank contains about half an inch of water, you then need to find ways to drain that amount of water out. 

After which, follow up with the use of a water-absorbing chemical compound. This measure would help in cleaning up the rest. Skimping this part runs the risk of putting your effort in vain. So, therefore, have diligence on this and see to it that the remaining water in your tank will be taken out.  

Apply a Biocide and Veer Away from the Use of Generic Water Treatment

We are not going to contradict ourselves here after suggesting that you clean up and clear away with the use of chemical treatment. Please note that it is not intended to destroy the microbes but rather to fix the environment so that it will be harder for them to flourish due to the absence of water. 

Only with the use of a high-grade biocide will you be able to address your tank’s active microbial contamination. Take caution though on its use because fuel biocides belong to the heavily guarded, controlled and regulated substances because they are capable of extinguishing every active living organism regardless of the liquid they are applied in. 

Ensure Best Mixing By Blending the Fuel Thoroughly

You can’t just pour biocide into your poly diesel fuel tank,  on top of your existing fuel and leave it as is hoping that it will diffuse down on its own, and carry out what it is expected to do. What the industrial bulk fuel users normally will do i0s to inject the biocide directly into the fuel line. Doing so will give them a good level of assurance that biocide will get mixed in, effectively.

Biocide will not work effectively if it is not in contact with what it is supposed to exterminate. This explains the reason why it needs to get mixed into your fuel and make it blend in really well.  It would be a great thing if you have a way of injecting into the fuel line. 

What others will do instead is to add the biocide and let it sink in, circulating for some time, which also works pretty well. And finally, see to it also that you have some extra fuel filters on stand by, to help you out on filtering dead microbes. Heed the above recommendations and you are likely to have better chances of getting things right the first time.  

Prevent Fire and Liability Issues with a Chemical Storage Cabinet

Are you tasked to handle large amounts of chemicals in your facility? If your answer to this is a yes, then you it’s a must for you to take special precautionary measures. At the same time, make sure that you meet the requirements set by NFPA and OSHA.

In facilities where chemicals are a given, safety is a priority. This is where a chemical storage cabinet should come in. With this, you would be able to handle chemicals safely thus avoiding danger and accidents. Read to know more how storage cabinets can be of great help.

 

Why Do You Need One?

Although it is a given that chemicals have their own containers, it does not necessarily mean that they are safe. Chemicals pose a threat to everyone in the facility and can cause fire.

In fact, most of industrial fires are actually caused by improper storing of chemicals. This is why this should be taken seriously. But what does it take to store chemicals properly and safely?

Another reason why it’s a must to store them the right way is for security. Doing so will not only prevent fire but as well as theft. At the same time, you will be less likely to get caught up in some liability issues that may arise if some unauthorized personnel were able to access the chemicals and handled them incorrectly, more so when one got hurt as a result. This is why you need to have a chemical storage cabinet in place.

 

Shopping for the Right Cabinets

So, what factors should you be looking for to make sure that the cabinet you are about to purchase will be a sound investment and you won’t be replacing it when an OSHA or NFPA inspector comes to check.

What you can do to make sure that you have the right one is to purchase only from a reputable vendor who specializes in industrial safety equipment. Doing this will ensure that you will have the right cabinet to meet the demands in your workplace. At the same time, they are sure to meet the set standards.

 

Some of the Criteria to Look Into

First off, you need to look for quality construction. The majority of safety storage cabinets today are made out of high-quality steel. But, there are some corrosive chemicals that should be stored in high density poly cabinets. This is because they would eat right through the steel and this can cause a big problem.

Another one, opt for the usual double-walled doors and tops, sides, and bottoms. It is also essential to have leak-proof seals, 3-point door locks, vents with fire baffle, etc.

These cabinets come in different types. Some of them even have legs which are great if you are dealing with a facility that has moisture on the floor or if there is a need to place them over outlets of vents. Finding the right ones is the key to make sure that you can prevent any danger, protect the workplace, and of course, your investment.

 

Important Things to Know About Using Spill Kits in Australia

oil spill on an oil rig

Buying spill kits in Australia is important to the safety and efficiency of many facilities, and if you are in the process of doing this, you need to make sure that you do it right. The wrong purchases will not only be a waste of your money, they may also significantly promote hazards in your workplace. Also, an improper approach to buying these kits may put your facility at risk of fines and other legal consequences. So to make sure that you do what is expected of you by the law while meeting your own industrial needs, consider these tips.

Read moreImportant Things to Know About Using Spill Kits in Australia

How to Use Spill Kits For Maximum Safety

spill kits

spill kitsSpill kits are designed to contain liquid and chemical spills in facilities, which makes them one of the most important accessories for safety. As such, any operation that handles hazardous chemicals must make sure that they are present, for the protection of everybody in the organisation, as well as the satisfaction of industrial requirements.

If you are yet to get kits for your facility, here are some of the most important pointers to consider so that you can maximise their safety benefits and ensure the wellbeing of your entire team and the operational efficiency of your facility.

Read moreHow to Use Spill Kits For Maximum Safety

Why the Bunded Tank is the Best for Storage of Fuel

A bunded tank can be defined as a tank within a tank. It is widely used in businesses where fuels are needed to store safely. A bunded tank is made by double steel walls and hence provides ultimate safety and protection of fuels and other fluids.

It is mostly used in the businesses where there is a requirement of large quantity of fuels on site. Some companies also use drum handling for storage system.

Gespasa Bunded Fuel Tank

Mostly Gespasa pumps are used to fill these types of tanks as they are specially designed for the purpose of fuel filling.

There are many advantages of bunded tanks in the industrial sector.

  • Bunded tanks are easy to install or relocate. Furthermore, you can customize bunded tanks according to your business requirements. It can be used in remote locations too, which makes it the ultimate choice of consumers.
  •  Installation and maintenance is very easy and can be transferred and relocated easily.
  • Bunded tanks are versatile. They are best suited for all types of petrochemicals and petroleum fuels. Furthermore, they can store waste oil and biodiesels too. This versatility makes bunded tanks make them preferred option for storage.
  • Bunded tanks are cost effective, durable, and reliable and have a wide range of shapes and sizes.