Flyingmachinesmusic

Four Proven Benefits of LED Worklights

LED worklights have been lighting the ways to a more improved working environment while promoting work efficiency. A standard incandescent lighting is becoming as a thing of the past because of the exceptional benefits that LED lights has to offer.

Listed below are some of the reasons why this type of lighting is preferred by so many people in today’s time.

They are very easy to install

Installing LED worklights is a cost-effective process. It is also very simple to do. All you just need are a little time and some tools. The majority of kits sold today has an instruction manual where details and a step-by-step guide can be followed.

You have to bear in mind though that you are installing it by yourself and some LEDS have voltage operating ranges. There are some that runs at 9 to 32 volts while others are at 10 to 30 volts. In these situations, the lights will still operate regardless of whether the vehicle is putting out 12 or 24 volts.

 

They are very easy to maintain

Very little upkeep is needed when it comes to LED lighting. Normal lighting in a vehicle could last for up to 11 years (solid usage). At 50%, LED lights can last for up to 22 years. Switching to this type of light can become a great investment for many people as it allows them to save a lot of money.

 

No need to worry about changing bulbs

When using LED lights, there is no need to worry about setting up a service call of to swap out different light bulbs. This will allow you to save money, time, and effort, especially during the most hectic projects.

To top this, led lights are likely to draw a fraction of amperage incandescent light draw. This means that they are cooler compared to normal lighting. This makes them an only an improved lighting source but they can also prevent accidental injuries.

 

They are much safer

LED lighting has an exceptional quality of light when compared to incandescent lighting. LEDS on a commercial vehicle would be able to shine through rain and thick fog. When using an incandescent light bulb, it wouldn’t be able to be very effective at penetrating through more than few feet, thus making the road less visible in case of severe weather conditions.

For a clear weather, LEDs are considered to be the better utility trailer accessory. Incandescent lighting can be difficult to distinguish in daytime, but LED can still be seen even from a greater distance. For example if the truck is stranded on the side of the road, LEDS could send a warning to others.

These are just a few benefits that you can enjoy if you choose LEDs for your lighting. These things are the reason why so many people prefer this, instead of choosing the other available options in the market.

Waterjet Cutting and Its Amazing Benefits

As far as metal cutting is concerned, there are various ways to easily accomplish the task. In fact, some of them are very simple and crude as a hacksaw. Others can be more technical such as lasers and the use of plasma cutting tools. But all these come with their own downsides. They can be in the form of heat-causing deformities in the cut lines to rough and messy edges. Some things can and can’t be cut with different methods. So, this is where waterjet cutting becomes of service bringing in so many benefits.

 

No Heat Involved

Unlike with other available methods, waterjet cutting does not involve heat. Meaning, there will be no melting, warping, or distorting along the edges that helps when you are creating precise cuts in case of complicated cuts.

 

Precision Results

This cutting tool comes with amazing precision. It provides the ability to produce precision cuts. However, this may come with a price as more precision means higher cost when setting up the materials and cutter needed to perform a cut. These precise cuts are made possible because cutting is controlled by specialized software and a computer.

 

Versatile

There are many methods that work really great in some types of materials but may not do so for others. With this cutting method, cutting almost any kind of material effectively is possible. One noted exception is tempered glass a few more specialized materials that may not work with it. Some of the materials that it can cut in high precision are alloys of different types, steels, stone, marble, wood, plastics, rubber, composites, and aluminum.

 

Time and Clean Up

One more exceptional benefit of this technology will be the clean up as it leaves very little to no burr on the parts so there will be very little need for cleanup or any secondary finishing such as sanding or grinding. With this, cuts can move along a lot quicker and this allows jobs to be completed a lot faster compared to other technologies.

Here are some more benefits that the technology can provide than other conventional cutting methods.

  • Faster turnaround right from the drawing board to the cut product
  • Faster setup time as a result of minimal required setup
  • Higher speed for faster job completion
  • Removes the need to re-sharpen tools after cutting a single or multiple pieces of a product.
  • The structural property of a material is not affected as it is cold-cutting
  • Its flexibility is ideal for prototype and production process because.

With all these great benefits from high-precision and fast turn-around to the versatility of cutting, it is understandable why this is becoming the preferred cutting method. If you are looking for a piece of high-tech or prototype material cut, then this is the solution that you have been waiting for.

 

DIY Air Compressor Repairs

An air compressor can explode if you do not practice or perform proper air compressor repairs to it, as well as maintenance.

There are three basic functions necessary for an air compressor to work at its best. It needs power, should maintain pressure, and be able to control the flow of compressed air. Here are some insights in you can fix and repair it in your own.

 

DIY Repair

You can do three DIY fixes by yourself as part of your air compressor repairs. The majority of malfunctions fall into any of these three categories. Keep in mind however that since air compressors have high pressure that could rupture in case the tank is damaged. In case of complex damage that needs repair, leave it to the professionals.

 

Adjust the Airflow

Remove the plastic cover off of the compressor by removing the screws. Then, lift this cover so you can take hole of the two screws located underneath on its pressure maintaining valve. The top screw is the one that turns the compressor off and the bottom one turns it on.

You need to turn your compressor on an off and be sure to check its settings. You can adjust the pressure using the upper screw. You can raise the pressure by tightening the screw or you can loosen it to reduce the pressure. Next thing, you should engage its pressure release valve and note the pressure as soon as the compressor kicks on. You can adjust the setting by using the lower screw. As soon as you have discovered the right pressure, finish up the repair by replacing the screws and cover.

 

Restore Power

Start by checking if the compressor is plugged in and if the switch is on. In case it is not turning on, hit the reset button. It is often found on the side of its motor near the power cord. Look for a round black or red button and hit it to reset the circuit breaker.

If after doing it the power is not yet restored, you need to check if the cord is still in its good condition and if there are plugs that are plugged in. Try to plug it to another socket and check if the circuit breaker is tripped for that plug that you are using. You should flip the break off and on.

 

Repair Leaks

Start by unplugging all hoses and tools then start your compressor so it will charge. Prepare a mixture of soap and water then pour or spray it around the fitting. Look for areas where bubbles form. If you see it, this means that there is a leak. Turn off your compressor and release the pressure from the tank.

Perform these simple DIY repairs to make sure that your air compressor is at its best condition and you can use it for a longer time.